标题: 邮件发送问题！请各位帮忙查看！ [打印本页] 作者: blackcb 时间: 2005-12-15 10:51 标题: 邮件发送问题！请各位帮忙查看！ 只要带附件的就发送不到这个地址（地点是法国的），我已经做了反向解析！<br>
<br>
<br>
The attached message had transient non-fatal delivery errors<br>
<br>
THIS IS A WARNING MESSAGE ONLY - YOU DO NOT NEED TO RESEND YOUR MESSAGE!<br>
<br>
This server is configured to automatically retry delivery at configured<br>
intervals. Subsequent attempts to deliver this message are pending.<br>
<br>
Failed address: frank@dffashion.nl<br>
<br>
--- Session Transcript ---<br>Thu 2005-12-15 10:13:55: Parsing Message <xxxxxxxxxxxxxxxxxxxxxxxx\pd50000029769.msg><br>Thu 2005-12-15 10:13:55: From: webmaster@******.com.cn<br>Thu 2005-12-15 10:13:55: To: frank@dffashion.nl<br>Thu 2005-12-15 10:13:55: Subject: Fw: this is a test message.<br>Thu 2005-12-15 10:13:55: Message-ID: <004201c60114$cc402f50$6001a8c0@erp><br>Thu 2005-12-15 10:13:55: MX-record resolution of [dffashion.nl] in progress (DNS Server: 221.12.*.***)...<br>Thu 2005-12-15 10:13:55: P=050 D=dffashion.nl TTL=(915) MX=[relay-2.tiscali.nl] {195.241.76.116}<br>Thu 2005-12-15 10:13:55: P=010 D=dffashion.nl TTL=(915) MX=[relay-1.tiscali.nl] {195.241.76.116}<br>Thu 2005-12-15 10:13:55: Attempting MX: P=010 D=dffashion.nl TTL=(915) MX=[relay-1.tiscali.nl] {195.241.76.116}<br>Thu 2005-12-15 10:13:55: Attempting SMTP connection to [195.241.76.116 : 25]<br>Thu 2005-12-15 10:13:55: Waiting for socket connection...<br>Thu 2005-12-15 10:13:59: Socket connection established (60.12.**.** : 2554 -> 195.241.76.116 : 25)<br>Thu 2005-12-15 10:13:59: Waiting for protocol initiation...<br>Thu 2005-12-15 10:13:59: <-- 220 put.tiscali.nl ESMTP Sendmail 8.9.3 (WOL 1.2.4)/8.9.3; Thu, 15 Dec 2005 02:57:24 +0100 (MET)<br>Thu 2005-12-15 10:13:59: --> EHLO ******.com<br>Thu 2005-12-15 10:14:00: <-- 250-put.tiscali.nl Hello mail.******.com [60.12.**.**], pleased to meet you<br>Thu 2005-12-15 10:14:00: <-- 250-8BITMIME<br>Thu 2005-12-15 10:14:00: <-- 250-SIZE 104857600<br>Thu 2005-12-15 10:14:00: <-- 250-DSN<br>Thu 2005-12-15 10:14:00: <-- 250-ONEX<br>Thu 2005-12-15 10:14:00: <-- 250-ETRN<br>Thu 2005-12-15 10:14:00: <-- 250-XUSR<br>Thu 2005-12-15 10:14:00: <-- 250 HELP<br>Thu 2005-12-15 10:14:00: --> MAIL From:<webmaster@******.com.cn> SIZE=159040<br>Thu 2005-12-15 10:14:09: <-- 250 <webmaster@******.com.cn>... Sender ok<br>Thu 2005-12-15 10:14:09: --> RCPT To:<frank@dffashion.nl><br>Thu 2005-12-15 10:14:10: <-- 250 <frank@dffashion.nl>... Recipient ok<br>Thu 2005-12-15 10:14:10: --> DATA<br>Thu 2005-12-15 10:14:10: <-- 354 Enter mail, end with "." on a line by itself<br>Thu 2005-12-15 10:14:10: Sending <xxxxxxxxxxxxxxxxxxxxxxxx\pd50000029769.msg> to [195.241.76.116]<br>Thu 2005-12-15 10:27:19: Connection timed out!<br>Thu 2005-12-15 10:27:19: This message is 63 minutes old; it has 0 minutes left in this queue<br>Thu 2005-12-15 10:27:19: Primary queue lifetime exceeded; message placed in retry queue<br>
--- End Transcript ---<br>
: Message contains [1] file attachments<br> 作者: blackcb 时间: 2005-12-16 09:19 标题: re:没人帮我吗？ 没人帮我吗？作者: goxia 时间: 2005-12-16 10:23 标题: re:你的附件多大，显示连接超时了 你的附件多大，显示连接超时了作者: blackcb 时间: 2005-12-16 10:49 标题: re:我的附件只要110K！是不是被他们那里的... 我的附件只要110K！是不是被他们那里的什么规则设置掉了啊！我就是发1K附件的也发不过去！普通信件可以，只要有附件的就不行！作者: rayko 时间: 2005-12-16 11:55 标题: re:发送分两个步骤的。第一步先从内网收进... 发送分两个步骤的。<br>
第一步先从内网收进MD，也即所谓的SMTP IIN。然后再从MD向外发，即SMTP OUT，<br>
查看相关日志，一般都可以找到原因。。。<br>
查下附件规则，延时情况。。。作者: zjjhcj 时间: 2005-12-17 08:27 标题: re:请给我收件人的地址，我帮你转发。设完了回... 请给我收件人的地址，我帮你转发。设完了回头再给你我设置的转发帐号。限不超过20个帐号。作者: zjjhcj 时间: 2005-12-17 08:30 标题: re:或者发信到我的邮箱largebee@gm... 或者发信到我的邮箱largebee@gmail.com,转发附件限制为10MB。直到你解决问题为止。作者: zjjhcj 时间: 2005-12-17 08:50 标题: re:Connection timed out... Connection timed out<br>
<br>
A connect or send request failed because the connected party did not properly respond after a period of time. (The timeout period is dependent on the communication protocol.)<br>
<br>
Check the obvious first: check that the destination address is a valid IP address. If you used a hostname, did it resolve to the correct address? If the hostname resolution uses a local host table, it is possible you resolved to an obsolete address. Can you ping that hostname?<br>
<br>
Do you have a router configured? Is the router up and running? (You can check by pinging it, and then ping an address on the other side of it.) Try a traceroute to the destination address to check that all the routers are functioning.<br>
<br>
Check your subnet mask. If you don't have the proper subnet mask, your network system may treat a local address as a remote address (so it forwards addresses on the local subnet to the router, rather than broadcasting an ARP request locally), or vice versa.<br>
<br>
希望有所帮助。<br>